
| Manufacturer | TEXAS INSTRUMENTS |
|---|---|
| Manufacturer Part No | TUSB2036VFCopy |
| Manufacturer Standard Lead Time | 28 weeks |
| Order Code | Re-Reel3124919RL Cut Tape3124919 |
| Your Part Number |
Need more?
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | $8.970 | $8.97 |
| Quantity | Price (Incl GST) |
|---|---|
| 1+ | $8.970 ($10.3155) |
| 10+ | $6.760 ($7.774) |
| 25+ | $6.210 ($7.1415) |
| 50+ | $5.900 ($6.785) |
| 100+ | $5.590 ($6.4285) |
| 250+ | $5.320 ($6.118) |
| 500+ | $5.270 ($6.0605) |
| 1000+ | $5.050 ($5.8075) |
Product Information
| Manufacturer | TEXAS INSTRUMENTS |
|---|---|
| Manufacturer Part No | TUSB2036VFCopy |
| Manufacturer Standard Lead Time | 28 weeks |
| Order Code | Re-Reel3124919RL Cut Tape3124919 |
| USB IC Type | USB Hub Controller |
| USB Standard | USB 2.0 |
| Supply Voltage Min | 3V |
| Supply Voltage Max | 3.6V |
| IC Case / Package | LQFP |
| No. of Pins | 32Pins |
| Data Rate | 12Mbps |
| No. of Ports | 3Ports |
| Operating Temperature Min | 0°C |
| Operating Temperature Max | 70°C |
| Product Range | - |
| Qualification | - |
| MSL | MSL 3 - 168 hours |
Product Overview
The TUSB2036VF is a 3-port Hub that provides up to three downstream ports in compliance with the USB 2.0 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. The downstream ports support both full-speed and low-speed devices by automatically setting the slew rate according to the speed of the device attached to the ports. The configuration of the BUSPWR pin selects either the bus-powered or the self-powered mode. The introduction of the DP0 pull-up resistor disable pin, DP0PUR, makes it much easier to implement an onboard bus/self-power dynamic-switching circuitry. With the new function pin, the end-equipment vendor can reduce the total board cost while adding additional product value. The TUSB2036 supports both bus-powered and self-powered modes.
- Integrated USB transceivers
- 3.3V Low power ASIC logic
- One upstream port and 3 programmable downstream ports
- Two power source modes (self-powered mode, bus-powered mode)
- All downstream ports support full-speed and low-speed operations
- Power switching and over-current reporting is provided ganged or per port
- Supports suspend and resume operations
- Suspend status pin available for external logic power down
- 3-state EEPROM interface allows EEPROM sharing
- Push-pull outputs for PWRON eliminate the need for external pull-up resistors
- Noise filtering on OVRCUR provides immunity to voltage spikes
- Supports 6MHz operation through a crystal input or a 48MHz input clock
- No special driver requirements
- Green product and no Sb/Br
Applications
Computers & Computer Peripherals, Consumer Electronics
Warnings
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Technical Specifications
| USB IC Type | USB Hub Controller |
|---|---|
| Supply Voltage Min | 3V |
| IC Case / Package | LQFP |
| Data Rate | 12Mbps |
| Operating Temperature Min | 0°C |
| Product Range | - |
| MSL | MSL 3 - 168 hours |
| USB Standard | USB 2.0 |
|---|---|
| Supply Voltage Max | 3.6V |
| No. of Pins | 32Pins |
| No. of Ports | 3Ports |
| Operating Temperature Max | 70°C |
| Qualification | - |
Technical Docs (1)
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Philippines Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .002268 |
