117201-HMC631LP3

117201-HMC631LP3 is an evaluation board for HMC631LP3 GaAs HBT vector modulator. HMC631LP3 is a high dynamic range vector modulator RFIC targeted for RF predistortion and feed-forward cancellation circuits, as well as RF cancellation, beam forming and amplitude/phase correction circuits. The I & Q ports of the HMC631LP3 can be used to continuously vary the phase and amplitude of RF signals by up to 360degrees and 40dB respectively, while supporting a 3dB modulation bandwidth of 200MHz. With an output IP3 of +26dBm and output noise floor of -160dBm/Hz (at maximum gain setting), the IP3/noise floor ratio is 186dB. The HMC631LP3(E) is ideal for cellular/3G & WiMAX systems, wireless Infrastructure HPA & MCPA error correction, pre-distortion or feed-forward linearization and beam forming & nulling circuits.

• Frequency range from 1.8 to 2.7GHz
• Input IP3: +35 dBm
• Supply current (Icq) is 93mA
• Supply voltage (Vcc) is +10V

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party