AD5755-1ACPZ

AD5755-1 is a quad, voltage and current output digital-to-analogue converter (DAC) that operates with a power supply range from -26.4V to +33V. On-chip dynamic power control minimizes package power dissipation in current mode. This is achieved by regulating the voltage on the output driver from 7.4V to 29.5V using a dc-to-dc boost converter optimized for minimum on-chip power dissipation. Each channel has a corresponding CHART pin so that HART signals can be coupled onto the current output of the AD5755-1. The device uses a versatile 3-wire serial interface that operates at clock rates of up to 30 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, DSP, and microcontroller interface standards. The interface also features optional CRC-8 packet error checking, as well as a watchdog timer that monitors activity on the interface. Application includes process control, actuator control, programmable logic controllers (PLCs), HART network connectivity.

• Resolution is 16bits (AVSS = -15V, loaded and unloaded)
• Dynamic power control for thermal management
• Current and voltage output pins connectable to a single terminal
• Output voltage ranges from -5 to +5V (AVDD = VBOOST-x = 15V)
• Total unadjusted error (TUE) is -0.04% FSR (min, AVDD = VBOOST-x = 15V)
• Relative accuracy (INL) is ±0.006% FSR (min, AVDD = VBOOST-x = 15V)
• Differential nonlinearity (DNL) range from -1 to +1LSB (guaranteed monotonic, AVDD = VBOOST-x = 15V)
• Zero-scale error is ±0.002% FSR (typ, AVDD = VBOOST-x = 15V)
• Gain error is ±0.004% FSR (typ, AVDD = VBOOST-x = 15V)
• 64 lead LFCSP package, operating temperature range from -40°C to +105°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party