EVAL-CN0204-SDPZ

EVAL-CN0204-SDPZ is a CN0204 circuit evaluation board. The circuit provides a full function, high voltage (up to 44V), programmable analogue output solution that meets most requirements for PLC and DCS applications. The AD5662 low power (0.75mW typical at 5V), rail-to-rail output, 16-bit nanoDAC device and the AD5751 industrial current/voltage output driver are well matched with respect to input and output voltage ranges, reference voltage requirements. The ADR444, with low drift, high initial accuracy, and low noise, provides the reference voltage for both the AD5751 and AD5662 and guarantees ultralow noise, high accuracy, and low temperature drift for the circuit. This circuit provides all typical voltage and current output ranges with 16-bit resolution and no missing codes, 0.05% linearity, and less than 0.2% total output error. The ADuM1301 and ADuM5401 provide all the necessary signal isolation between MCU and analogue signal chain. The ADuM5401 also provides isolated 5V power.

• Evaluation board connects to SDP-B controller board (EVAL-SDP-CB1Z) through 120-pin connector