LTC2634IMSE-LZ10#PBF

LTC2634IMSE-LZ10#PBF is a quad channel, 10bit voltage output DAC with an integrated, high accuracy, 10ppm/°C low drift reference. LTC2634-L has rail-to-rail output buffers and is guaranteed monotonic. The LTC2634-L has a full-scale output of 2.5V and operates from a single 2.7V to 5.5V supply. These DACs communicate via an SPI/MICROWIRE compatible 3-wire serial interface which operates at clock rates up to 50MHz. The LTC2634 incorporates a power-on reset circuit. Applications include mobile communications, process control and industrial automation, automatic test equipment, portable equipment, and automotive.

• Double buffered data latches, AEC-Q100 qualified for automotive applications
• 2.5V full scale voltage internal reference mode
• Reset to zero-scale in internal reference mode
• Integral nonlinearity is ±0.2LSB typical at (VCC = 3V, internal ref, TA = 25°C)
• Offset error is ±0.5mV typical at (VCC = 3V, internal ref, TA = 25°C)
• Gain error is ±0.2%FSR typical at (VCC = 3V, internal ref, TA = 25°C)
• Voltage output slew rate is 1.0V/µs typical at (TA = 25°C, VCC = 2.7V to 5.5V)
• Multiplying Bandwidth is 320KHz typical at (TA = 25°C, VCC = 2.7V to 5.5V)
• Power supply rejection ratio is -80dB typical at (VCC = 3V ±10% or 5V ±10%)
• Industrial temperature range from -40°C to 85°C, 10-lead MSOP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party