MAX1480ACPI+

MAX1480ACPI+ is a complete, electrically isolated, RS-485/RS-422 data-communications interface solutions in a hybrid microcircuit. Transceivers, optocouplers, and a transformer provide a complete interface in a standard DIP package. A single +5V supply on the logic side powers both sides of the interface. The MAX1480Adriver slew rate is not limited, allowing transmission rates up to 2.5Mbps. The MAX1480A is designed for half-duplex communication. Drivers are short-circuit current limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a known output (RO low for the MAX1480A/B/C, RO high for the MAX1490A/B) if the input is open circuit.

• Typically withstand 1600VRMS (1 minute) or 2000VRMS (1 second)
• Isolated outputs meet all RS-485/RS-422 specifications
• 0.2µs driver enable time
• Temperature range from 0°C to +70°C
• Available in 28-pin PDIP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party