MAX17552ATBEVKIT#

MAX17552ATBEVKIT# is a MAX17552 5V evaluation kit (EV kit) (TDFN) which is a fully assembled and tested circuit board that demonstrates the performance of the MAX17552 60V, 100mA ultra-small, high-efficiency, synchronous step-down DC-DC converter in a 10-pin TDFN package. The EV kit operates over a wide input-voltage range of 6V to 60V and provides up to 100mA load current at 5V output. It draws only 26µA supply current under no-load conditions (EN/UVLO connected to VIN). The EV kit is programmed to switch at a frequency of 220kHz and delivers a peak efficiency of 93% with the supplied components. The device is simple to use and easily configurable with minimal external components. It features cycle-by-cycle peak current limit protection, undervoltage lockout, and thermal shutdown. The EV kit comes installed with the MAX17552ATB+ in a 10-pin (3mm x 2mm) TDFN package.

• 26µA no load supply current
• Enable/UVLO input, resistor-programmable UVLO threshold
• Internal or programmable soft-start
• Selectable PWM and PFM modes of operation
• Open-drain (active low) RESET output
• Overcurrent protection
• Overtemperature protection
• Proven PCB layout
• Fully assembled and tested

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party