DEMO9S08DZ60

The DEMO9S08DZ60 is a demo board for MC9S08DZ60 microcontroller. The MC9S08DZ60 microcontroller provide significant value to customers looking to combine controller area network (CAN) and embedded EEPROM in their applications. This combination will provide lower costs, enhanced performance and higher quality. The MC9S08DZ60 improves low voltage/low power performance without sacrificing CPU performance. This MCU is created by an advanced wafer fabrication process that gives MC9S08DZ60 a normal operating voltage of 2.7V to 5.5V. As a result, MC9S08DZ60 is capable of higher bus speeds at lower operating voltages. The DEMO9S08DZ60 board operates in two operating modes, run mode and debug mode. The run mode executes the user application from power on or reset and debug mode supports the development and debug of applications.

• BDM_PORT header for BDM cable support
• 32KB flash
• 4KB RAM
• 2KB EEPROM
• Integrated P&E USB BDM
• Onboard +5V regulator
• LIN PHY with two, 4 position Molex connectors
• Two user, one reset push switches
• 14 position DIP switch
• Power input from USB BDM

Applications

Automotive, Building Automation, Industrial, Medical

Contents

MC9S08DZ60 demo board, USB cable, Software CD, Documentation.

Notes

In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.