BR93H56RF-2CE2

The BR93H56RF-2CE2 is a 2Kbit serial EEPROM of serial 3-line interface method in 8 pin SOP package. This EEPROM conforming to Microwire bus and withstands electrostatic voltage up to 6KV (HBM method typ). It has an address auto increment function at READ operation, prevention of write mistake such as write prohibition at power on, write prohibition by command code and write mistake prevention circuit at low voltage. Device is high reliable using original double cell structure, more than 50 years data retention (Ta ≤ 125°C) and more than 300000 write cycles (Ta ≤ 125°C).

• Single supply voltage operate from 2.5V to 5.5V
• Operating temperature range from -40°C to +125°C
• Automotive grade AEC-Q100 qualified
• Self timed programming cycle
• Program condition display by READY/BUSY (complementary)
• Data set to FFFFh on all addresses at shipment
• Low supply current for write operation is 0.8mA (typ) at 5V
• Low supply current for read operation is 0.5mA (typ) at 5V
• Low supply current for standby operation is 0.1μA (typ) at 5V
• Bit format of 128 x 16bit

Applications

Embedded Design & Development, Consumer Electronics, Portable Devices, Communications & Networking, Automotive

Warnings

ESD sensitive device, take proper precaution while handling the device. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Notes

The residue of flux may negatively affect product performance and reliability when highly active halogenous (chlorine, bromine etc) flux is used.